miller mig welding cart

MILLER MILLERMATIC 211 W/HD CART MIG WELDING PKG 907422 $1,144.77

MILLER MILLERMATIC 211 W/HD CART MIG WELDING PKG 907422 $1,144.77

MILLER MILLERMATIC 211 W/HD CART MIG WELDING PKG 907422 $1,144.77

MILLER MILLERMATIC 211 W/HD CART MIG WELDING PKG 907422 $1,144.77

Chicago Electric MIG Welder Review

mig welding copper pipe

Zipwelders

The ZipweldersTM are considered one of the most advanced shear welder in the world today. These fully automatic welding machines were developed with an intention to reduce the operator involvement and increase mill uptime by reducing weld failures. The ZipweldersTM are designed for use on either start/stop or continuous lines like pickling lines, tube/pipe mill, coil buildup, galvanizing lines, and annealing and pickling lines. Zipwelders are used in a variety of applications such as stamping, tube/pipe mill, and many types of steel and stainless steel process lines. These machines can also be used for welding a wide range of alloys including stainless steel, carbon steel, copper, and aluminum.

The modern day RCM Zipwelders make use of some of the most advanced welding methodologies such as Tungsten Inert Gas (T.I.G.) welding, Plasma welding, Metallic Inert Gas (M.I.G.) welding, and last but no the least Laser Beam welding. The uniqueness about the Zipwelders is that they can shear and butt weld a variety of materials at varied range of thickness be it 0.15mm (.006”) to about 25mm (1.00”) and as wide as necessary. With the advent of new technology, newly developed Zipwelders machines can weld any type of weldable material, and have the capability to weld metals up to 2,400mm wide.

Another major example of innovation in ZipweldersTM is the ME 500-28 Zipwelder™. This Zipwelder is a computer operated automatic welder, equipped with an exit pinch roll. The ME 500-28 Zipwelder™ has been designed in such a manner that it can cut through a steel coil end up to 12.7mm (.500”)  thick and 700mm wide (28”) from a steel coil. When operated in automatic mode, the trailing coil end automatically stops in the shear opening, whereas the exit side guides center the strip automatically, allowing the exit weld clamp to close down automatically. The operator feeds the leading steel coil into the Zipwelder™, and then the entry sides and entry weld clamp closes. The specialty of Zipwelder™ is that it automatically shears the two coil ends, and automatically makes an MIG weld based on the selection as per the on-board computer which controls not just the weld gap, wire speed, weld speed, but also the welding voltage. As with shear welder, these ZipweldersTM can be similarly custom designed, as per the requirement of the customer.

Stuck in Vermont 36: Rosie’s Girls

plasma cutters rated

A Review of the Fellowes Plasma 180 Guillotine Paper Cutter

Fellowes makes some terrific products that are great for use in today’s busy workplaces. One of them is the Plasma 180 Guillotine Paper Cutter. If you need a cutter, you should check out this product’s strengths and weaknesses. Here they are….

Strengths:

• The primary reason to purchase a guillotine paper cutter is so that you’ll be able to cut a large number of sheets at one time. That’s definitely the case with the Plasma 180. It has a 40-sheet cutting capacity so you can cut as much paper as possible very quickly.
• This cutter can be used with different sizes of paper. It has a 18-inch cutting length so you’ll be able to slice through letter- and legal-sized paper with ease. You’ll even be able to work with tabloid-sized documents that are 11″ x 17″.
• The Plasma 180 has a very durable blade that’s been made out of stainless steel. The blade is strong enough to withstand heavy use so you can cut everyday without any problems.
• As far as safety features go, this cutter is equipped with Fellowes’ SafeCut Guard. This is a metal shield that keeps your fingers far away from the blade so you don’t end up cutting yourself. The SafeCut Guard can fold down when you’re not using the trimmer so you’ll be able to store it more easily.
• The Plasma 180 has a base that’s made out of metal, making it extremely durable. There are cutting guides printed on it, as well as a protractor so you can make angled cuts. Also, the base has rubber feet on the bottom of it so the cutter will stay in place when you’re using it.
• Your materials will remain in one place and won’t fan because this device has an automatic paper clamp. This feature ensures that your documents will be cut just the way you want and you won’t end up trimming too much or too little off.
• The Plasma 180 is one of the more affordable guillotine cutters on the market. It retails for less than $350.00 so you can have a high-quality trimmer without parting with a lot of cash.
• Finally, this device’s blade is backed by a 10-year warranty. Every other part of this device is under a 2-year warranty.

Weaknesses:

• Due to its cutting length, this device is pretty big. With approximate dimensions of 5″ (height) x 14″ (weight) x 30″ (depth), you might have some trouble finding room for it.
• Also, since the cutting length is 18″, you can’t use this device with really large sheets of paper.

The Fellowes Plasma 180 is a first-rate guillotine cutter, especially for such a low price. While it’s designed for use with paper that’s 18″ long or less, this device would be a great choice if you need a new cutter. It’s made out of high-quality materials and it’s very safe to use. So if you’re in the market for this kind of product, be sure to check out the Plasma 180 today.

Cut 50 Plasma Cutter

aluminum mig welding wire

Aluminum Mig Welding Wire 4043 16# Spool .030 New! $69.95

Aluminum Mig Welding Wire 5356 16# Spool .030 New! $69.95

Aluminum Mig Welding Wire 5356 16# Spool .035 New! $66.95

Aluminum Mig Welding Wire 4043 16# Spool .035 New! $66.95

Harris .035 5356 Aluminum MIG Welding Wire 16 lb. Spool $65.00

Harris .035 4043 Aluminum MIG Welding Wire 16 lb. Spool $60.00

Harris 3/64 5356 Aluminum MIG Welding Wire 16 lb. Spool $60.00

Harris 3/64 4043 Aluminum MIG Welding Wire 16 lb. Spool $59.00

Harris .030 5356 Aluminum MIG Welding Wire 12 lb. Spool $57.00

Harris .030 4043 Aluminum MIG Welding Wire 12 lb. Spool $52.00

LOT OF 5 SPOOLS MIG WELDING STEEL & ALUMINUM WIRE $49.95

10 Spools Aluminum Mig Welding Wire 5356 1# .030 New! $48.00

10 Spools Aluminum Mig Welding Wire 4043 1# .035 New! $48.00

10 Spools Aluminum Mig Welding Wire 4043 1# .030 New! $48.00

8 1 lb Spool .030″ 5356 Aluminum Mig Weld Welding Wire $39.20

8 1 lb Spool .030″ 4043 Aluminum Mig Weld Welding Wire $38.80

8 1 lb Spool .035″ 5356 Aluminum Mig Weld Welding Wire $38.40

8 1 lb Spool .035″ 4043 Aluminum Mig Weld Welding Wire $38.40

5 Spools Aluminum Mig Welding Wire 5356 1# .030 New! $27.50

5 Spools Aluminum Mig Welding Wire 4043 1# .035 New! $27.50

5 Spools Aluminum Mig Welding Wire 4043 1# .030 New! $27.50

Aluminum welding wire ER4043 3/64 5 pound roll new mig $22.00

1 Lb. Spool .030 Aluminum Alloy ER4043 Mig Welding Wire $18.70

Crown 1# Spool .030″ 4043 Aluminum MIG Welding Wire $15.00

Summit Racing Aluminum MIG Welding Wire SHK12011 $11.49

Summit Racing Aluminum MIG Welding Wire SHK12012 $11.49

ER5356 MIG ALUMINUM WELDING WIRE .30\”LB. $11.47

ER5356 MIG ALUMINUM WELDING WIRE .30\”LB. $11.47

ER5356 MIG ALUMINUM WELDING WIRE .30\”LB. $11.47

ER5356 MIG ALUMINUM WELDING WIRE .30\”LB. $11.47

ER5356 MIG ALUMINUM WELDING WIRE .30\”LB. $11.47

Best Welds .030 ER4043 Aluminum MIG Welding Wire 1 lb. $10.50

Best Welds .030 ER 5356 Aluminum MIG Welding Wire 1 lb. $10.50

Crown 1# Spool .030″ 5356 Aluminum MIG Welding Wire $10.00

(2)1 lb ALUMINUM.030 MIG WELDING WIRE CAMPBELL HAUSFELD $9.99

Best Welds 3/64 ER5356 Aluminum MIG Welding Wire 1 lb. $9.95

Best Welds .035 ER4043 Aluminum MIG Welding Wire 1 lb. $9.95

Best Welds .035 ER 5356 Aluminum MIG Welding Wire 1 lb. $9.95

Best Welds 3/64 ER 4043 Aluminum MIG Welding Wire 1 lb. $9.95

CAMPBELL HAUSFELD ALUMINUM MIG WELDING WIRE 1 LB WE3030 $7.99

Mig Welding and Arc Welding What is It?

Welding is simply using electricity to melt metal together. Simple as that, nothing more nothing less.

Mig welding is called “Metal In Gas” welding. In the early days it was called “Metal Inert Gas” welding. But some gases that you use in the mig welding process will actually not be “inert”.

Some gases will actual be the opposite which is “active”. So now there is also another name and that is MAG welding or “Metal Active Gas” welding.

But in general it’s just mig welding.

Next…..

The biggest thing that makes a mig welder a mig welder is that you hold onto a mig welding gun http://www.learn-how-to-weld.com/welding-torch.html

The mig welding gun or welding torch feeds the electricity needed to weld. It feeds the shielding gas needed to weld and it also feeds the mig welding wire to the weld.

When mig welding with a mig welding gun, all you do is “in a nut shell” pull the trigger and away you go. Simple.

Mig welding is the easy way to weld.

Arc welding http://www.learn-how-to-weld.com/arc-welding.html is still using electricity. But this time there is no shielding gas, and there is no constant feeding of mig welding wire into the weld.

When arc welding you will use a welding rod or welding electrode. On the welding electrode there is a coating of flux. When you weld, this “flux” will burn off and create the shielding gases needed to weld.

Like in mig welding you need a shielding gas, with arc welding or also know as SMAW (Shielded Metal Arc Welding), you still need a protective gas to weld. This is how it is done with stick welding by using the flux coating on a welding rod.

You can mig weld mild steel, stainless steel, aluminum, high tensile steels, etc.

And you can arc weld mild steel, stainless steel, high tensile steels as well.
I’m not 100% sure if there is a welding rod to weld aluminum ( I think there might be). If there is, it is not extensively used in industry as I have not heard or seen of it being used.

Cheers,
Peter
http://www.learn-how-to-weld.com

Mig Welding Aluminum with a Spool Gun – Aluminum Mig Welding – Mig Aluminum Welding

plasma cutters northern tool

Northern Tool Plasma 375 Set-Up

mig welding quizzes

plasma cutters alaska

CNC Plasma Cutter

mig welding certification test

Using Your Associate’s Degree in Welding to Find a Job

If you’re already looking at getting your Welder Associate’s degree in Florida or anywhere in the rest of the country, you have probably heard about how much demand there is for qualified welders in the industry.

There are lots of high paying, entry level welding jobs available to qualified welders who have passed their certification tests. Since welding regulation is so granular in the United States and the qualifications are so different based on where you got your welding associates degree or other welding training, it’s important to have good core education to back you up as you search for a fulfilling and lucrative welding career.

Many Welding Opportunities Available In a Variety of Locations

There are many different choices for someone who has attained a Welder Associate’s degree. Some pay much better than others.

• Entry-level “roustabout” welding job on an off shore oil rig can pay up to $60,000 a year, and workers typically get half the year off.

• Joining a local welding union will also help you get steady work with good pay. It’s common knowledge that union jobs pay better than non-union jobs. If you have a more artistic bent working in a custom design shop or machine shop could be a perfect application of your welding skills.

• Pipe welders often make more money than those who can’t weld pipes. Also, welders who can successfully weld different materials such as aluminum and stainless steel are also in high demand and can get paid a lot more.

• Different types of welding have different applications and different pay scales. MIG welding is common and is the easiest type to perform. TIG welding is harder and typically those who are successful TIG welders do well.

Getting an Associate’s Degree is a Great First Step for a Welding Career

The key to finding a welding job that can make your monetary dreams come true is to succeed in the field to begin with. Getting a welding associate’s degree from an accredited welding school is the most important step because that training will help you get a foot in the door so that you can continue your practical education on the job.

How to set up a welding certification bend test plate

mig welding hints

MIG Welding Principles

mig welding troubleshooting

Sinopec denies the "oil problem" who is responsible to the oil?

Sinopec Hainan is suspected to be explosive, “the oil problem,” the company denied

    Network, according to reports the South China Sea since late April has Haikou 4S shop has received a number of car breakdowns car, with speed instability, knock, speed, etc. I could not get the same fault causes a large number of vehicles, issue of cars involved Chang’an Suzuki, Toyota series, Chevrolet and other brands. Reported that, according to the person in charge 4S shop, failure by asking the owner, most of them are in the Sinopec gas station after refueling problems. Maintenance personnel on failure to clean up the engine after the car and put a qualified petrol, car troubleshooting.

    Then the oil for the problem, authorities conducted an investigation, but the problem is still not out of stone falling into the water.

    Although Sinopec Hainan Branch has done to clarify, but yesterday there are users for such a clarification is still grave doubts, one owner of Beijing’s surname Zhao told reporters that if his car had no problems, a lot of cars has occurred after refueling problems will certainly cast doubt on the quality of oil. “Even if that oil quality associated with the fault is really difficult, but not as the oil companies do not do the investigation in the case of relations on the whitewash.”

    Sinopec Hainan, said the company checking and fuel quality issues has nothing to do with the oil

    People’s Network reported for Hainan, a media report alleging “in gasoline,” the statement from Sinopec, Sinopec Hainan on May 7 the company issued a statement saying the company of all oil depots, petrol filling stations are operated by oil from China Sinopec Hainan Refining & Chemical Co., Ltd., Hainan refinery product quality, production of refined oil supply in addition to petrochemicals, the long-term supply of Hong Kong, Guangdong and other regions, there were not any quality problems. The company has not received complaints related to, “the report of the problem led to the sea some of the vehicles damaged oil problem has nothing to do with my company.”

    May 9, Sinopec Hainan Branch Office of the Leader said in an interview, the media published reports “in gasoline” and Sinopec concerned, they immediately reported the petrol stations in the sample that self-test, no found the problem. The official said that, never as gas stations and gas stations located in Longhua Road, Haikou, busy road, re-fueling of vehicles per day at least 1000, if it is a problem with fuel quality should be a major outbreak is right rather than a problem of this fragmented style.

    ”So these cars so-called ‘fuel problem’ should be sufficient to show the real problem of petrol stations. We should look at the problem objectively, waiting for quality inspection and test results out of the business sector do uncertain.” Sinopec Hainan Branch 1 bit executives declined to be named said that if the testing results indicate that there are problems in the petrochemical gasoline, Sinopec will responsibly address these issues, please rest assured owners. Sinopec Hainan currently has correction self-examination, detection of the province’s gas station in batches of refined oil, until now no quality problems.

    Interview, Sinopec Hainan company executives do not want all the more to disclose information, but they have more than once said: Sinopec Hainan’s gasoline comes from unity of the island’s Yangpu refining extraction, and oil into the vehicle owner the fuel tank through a strict quality control before, we we be absolutely sure of petrol!

    Haikou is “in oil” events involved in the investigation of Hainan QC Business

    Since late April has seen a number of brands in Haikou as “oil problem” caused damage to the car event, now Trade and Industry Department of Hainan Province and the quality inspection departments have been involved in the investigation.

    The problem more Toyota cars damaged oil quality inspection and business involved in the investigation

    Use the “oil problem” caused damage to the vehicle, including FAW-Toyota, Changan Suzuki, Buick, Chevrolet and other brands, which, especially FAW Toyota is more serious.

    Mr. Cloud received complaints Sinopec Hainan oil branch staff Miss Ye said Mr. Cloud received a complaint, they Longhua Road overnight on the oil in gas stations, testing, test results show that oil quality is no problem.

  Currently the Bureau of Hainan Province and Hainan Province Quality and Technical Supervision have been involved in the investigation “in oil” event.

    Sampling stations will be part of the province of Hainan gas station owners for compensation

    South China Sea news report, from the owners for the recent complaints over “problem petrol”, the Hainan Provincial Quality and Technical Supervision Director of Law Enforcement Supervision Department Wangming Qin told reporters when Southern Metropolis Daily said: Hainan Provincial Bureau of Quality Supervision will be filling the whole province has unified supervision and sampling stations, random inspection program has already identified.

    Reporter learned that, in addition to newspaper coverage of the Wenchang oil quality drivers complained of a gas station issue, Hainan, Hainan, Xinhua News Agency, several media outlets and all of the “problem gasoline,” carried a report, has aroused wide concern.

    Reporters also found that most of these problems occurred in the private petrol stations to provide gasoline, but now there has been some damage to private gas stations and car owners to reach an agreement for compensation from the gas station owner is responsible for the maintenance of the loss.

    Hainan Province, Wang Mingqin Quality and Technical Supervision Department, the Director of Law Enforcement Supervision, said the problem they had received numerous complaints of gasoline, the relevant departments held an emergency meeting today, the next step will conduct unified supervision and sampling stations throughout the province. Good sampling program has been developed for testing, the results came out, through the news media published a timely manner to the community.

    Summary:

    Have suggested the judiciary, Sinopec line self-examination should be affirmed, but according to the principle of avoiding conflicts of interest, Sinopec’s self-examination conclusions and very questionable. Authority departments need to come forward at this time, a statement to the consumer. The face of powerful state-owned monopoly, the test of our ability and the ruling authorities time to morality.

    Oil problem should now be more relevant departments responsible for attention and related businesses, the problem oil remain, the people are not at ease travel problems on the day, security is not guaranteed. We believe that the community can have more and more people are concerned about oil, related enterprises and government departments would also be responsible in the end.

MIG Welding Troubleshooting